Rein Wellhead Equipment was contacted by the oil & gas operating company from Middle East to supply complete sets of flowback and well test equipment. At this moment, engineers and project managers of Rein is working on development cost-effective and high-durable solution for the natural gas and condensate fields.
Frac flowback system is designed to remove debris and other impurities after hydraulic fracturing, while separating valuable liquid hydrocarbons for further disposal. Flowback and well test system consists of emergency shutdown valve, ESD panel, choke manifolds, debris (junk) catcher, sand traps, high-stage and low-stage separators, frac tanks, flare stacks, hydraulic control panel, HP piping, LP piping, fittings and other necessary equipment for oilfield operations.
Emergency Shutdown Valve
Emergency Shutdown Valve is a standalone safety device which is designed to shutdown the flow line, protecting upstream equipment and personnel from uncontrolled pressure and temperature. Emergency Shutdown Valve works on “fail-safe” mode, and has actuated hydraulic actor, which keep line open under hydraulic pressure (2500-3000 psi). ESD console consists of oil pump, pneumo-hydraulic pump, push bottoms, and other devices required for operation.
Choke Manifold
Choke manifold is designed to reduce the flowrate, thus, pressure, conditioning stream for further handling in upstream equipment. Choke manifold consists of several gate or plug valves, as well as choke valves.
Debris (Junk) Catcher
Debris Catcher or Plug Catcher is designed for bulk removal of debris formed during hydraulic fracturing. Plug catcher has special inserts which catches unwanted substances, cleaning the flow.
Sand Trap
Sand Trap is vertical mechanical device designed to remove smaller size sands and solids from flow stream applying gravitational force, which drives heavier substances downwards, while lighter substances (oil, gas, water) flows from the top.
Horizontal Separators
Horizontal Separator are one of the most important oilfield equipment, which separates well fluids into three or two phases. Horizontal separators are either designed for high or low pressure depending on the application regime. Horizontal separators have one inlet line, gas outlet line, relief line, water outlet line, oil outlet line, which are equipped with valves and instruments. Horizontal separator can be trailer-mounted for convenient mobilization from one well to another.
Flare stack
Flare stacks, either 40 ft. or 60 ft. are designed to dispose free gas safely by burning it. Flare stacks can be skid-mounted or trailer-mounted for convenient mobilization and operation. Flare stacks have pilot and ignition system, allowing operator to operate safely.
Frac tank
Frac tanks are special tanks which are designed to keep liquids coming from the well. Frac tanks can be designed with trailer base for convenient transportation and mobilization.
Rein Wellhead Equipment, a division of Rein Process Equipment, provides complete packages for well clean-up, well testing, and early production facilities. Feel free to contact Rein for technical support and quotation.